50kHz-3GHz Portable Vector Network Analyzer with 2.8" LCD Display & USB Interface - RF Antenna Testing for Ham Radio, WiFi, and Cellular Networks

Specification: Item Type: Vector Network Analyzer Frequency Range: 50kHz-3GHz Frequency Tolerance: 2ppm Frequency Stability: 0.5ppm System Dynamic Range (Calibrated): 70dB (up to 1.5GHz), 60dB (up to 3GHz) S11 Noise Floor (Calibrated): -50dB (up to 1.5GHz), -40dB (up to 3GHz) Scanning Speed: 100 points/second Display: 2.8in, 320 x 240 USB Interface: Micro USB Power Supply: USB, maximum charging current 1A Battery: 1950mAh Li ion battery (built in battery) Battery Connector: JST-XH 2.54mm Maximum Scan Point (On Device): 201 Maximum Scan Point (USB): 1024 Port 2 Return Loss (1.5GHz): 20dB typical Port 2 Return Loss (3GHz): 13dB minimum VNA-QT Software Support Platform: For Linux, for Windows (7+), for iOS Plan Package List: 1 x Analyzer Host 1 x Micro USB Cable 2 x 30cm SMA Male to Male SS405 RF Cable 1 x SMA Male Calibration Kit Open 1 x SMA Male Calibration Kit Short 1 x SMA Male Calibration Kit Load 1 x SMA Female to Female Connector 1 x Touch Screen Pick and Lanyard Set 1 x User Manual 1 x EVA Storage Bag Note: Using a similar user interface to for NanoVNA, but with a different technical architecture, the analyzer does not load initial calibration data at startup, and does not automatically insert calibration data after the user changes the frequency, which must be restarted after every power on and frequency change. Calibrate or recall calibration data. Please read the user manual carefully before use to avoid damage to the device.

POWER SUPPLY: With Micro USB data cable, the maximum charging current is 1A, and the analyzer has built in 1950mAh lithium ion battery, convenient to use at any time.

CABLE AND CALIBRATION KIT: The included SS405 SMA RF cable provides good amplitude and phase stability, and the calibration kit ensures a calibrated SWR of less than 1.03 up to 3GHz.

SPECIFICATIONS: Vector network analyzer, with 2.8in display, and the frequency range up to 50kHz-3GHz, has compact structure and strong practicability.

WITH STORAGE BAG: Equipped with EVA storage bag, which can well protect the network analyzer from impact and scratch.

METAL SHELL: The metal casing is adopted, which can fully protect the internal precise circuit of the analyzer and fully consider the protection of the external interface.